Philips DTR 100 사용자 설명서

U

SING

 

THE

 S

ET

 T

OP

 B

OX

13

En

gli

sh

Configuration 

The Configuration window allows you to customise vari-

ous settings. 

 1 Press the OPT button to display the Configuration window. 

You can select from the available options for each of the 

items in the Configuration window. See below for a typical 

display.

The text along the lower banner changes according to the 

item selected. In this example, 

TV Scart Out

 is selected. 

The currently set option is RGB. The other choices availa-

ble for this item are CVBS and S-Video. 

 2

Use the 

 buttons to display the options in turn. 

 3

Use 

 to navigate through the configuration list until 

you reach the item you want to re-configure.

 4

If you use the re-modulator (out) you have to choose a 

channel that is not disturbed by any input channel for a 

good output quality.

 5

Use 

 to step through the options until you reach the 

new setting. 
Some configurations require further information to be 

entered in subwindows which are displayed when these 

items are selected. 

 6

Press 

Exit

 to close down the configuration window and 

return to the previously displayed channel. 
The configuration settings are now as they were set at the 

time you pressed the 

Exit

 button. 

Receiver Upgrade 

When Receiver Upgrade is selected for re-configuring you 

will be presented with the following window: 

 1

Use 

 to move to the first item shown. 

 2

Use 

 to disable or enable automatic STB firmware 

download when available. If enabled, this will be carried 

out automatically and the listed Receiver Upgrade version 

number will be changed accordingly. 
If you want to check immediately for an STB firmware 

upgrade: 

 3

Use 

 to move to the second item shown. 

 4

Press 

 to start the search for an upgrade. 

You will be informed that the system is searching for an 

upgrade and whether or not an upgrade was found. 

 5

Press 

Exit

 to return to the Configuration menu. 

Parental Settings 

The Parental Setting feature allows you to password pro-

tect groups of menus or allow access to all menus. 

 1

Use  

to 

highlight 

Parental Settings

. 

 2

Press . 

Enter the Lock Key

(default is 0000).

The window below is displayed: 

 3

Use 

 to step through and display the available options: 

All Menus

, 

Installation Menus

 or 

None

 (Disabled). 

Audio 

Language:

You can choose the default played audio lan-

guage between English,Welsh and Gaelic if a pro-

gram is broadcast in more than one language.

TV-Type:

Choose the type of TV you have

4:3 / 16:9.

WideScreen 

Mode:

 Set your preferred mode for movies or shows 

that are broadcast in 16:9. 

Note:If your TV type is set to Widescreen this 

function is not available.

TV Scart Out:  Output can either be RGB, CVBS or

S-Video.

VCR Scart 

Out: 

Output can either be CVBS or 

S-Video.

Favourite 

mode: 

Turn Favourites Mode on/off.

Receiver 

Upgrade:

To download software upgrades from broad-

casters or the manufacturer to further enhance 

the current service. 

Parental 

Settings:

Create viewing restrictions on all available chan-

nels. Once activated a lock key code must be 

entered to view the TV channels.

UHF Out 

Settings:

If your TV has no SCART you have to connect 

the receiver as described on page 8 and choose 

a channel that is not disturbed by any input 

channel for a good output quality. You have to 

start a new channel search on your TV and wait 

until receiving pictures in good quality.