Avaya 4622SW IP 사용자 설명서

When your phone is logged off, the top line displays “Ext. =*.”

1. To reinstate your phone following a log off, use the dialpad to enter your Extension Number, 

then press the Pound (#) key.

The display prompts for entry of your password.

2. Using the dialpad, enter your PBX/switch Password then press the Pound (#) key.

The phone is now ready for use.

The 4622SW IP Telephone’s backup and restore options allow you to:

●

Back up your options/preference settings, your Speed Dial button labels, names, and 
numbers, and Feature button labels. This occurs automatically whenever you save a 
change to any one of those settings or buttons. Automatic backup protects this data 
against system failure, by allowing you to restore your backup file of active settings and 
button labels.

●

Restore options settings, Speed Dial button labels, names and numbers, and Feature 
button labels following a phone failure or replacement.

●

Establish or modify FTP (File Transfer Protocol) settings such as the network server 
address, directory path for saving backed-up data, and a User ID and Password for server 
access through your phone.

●

Verify whether an automatic backup has occurred.

Because each telephone system has unique characteristics and settings, modifying the Backup/
Restore options usually requires your System Administrator’s assistance. For example, it is 
unlikely that you know the specific Server IP Address to enter when setting up FTP parameters 
without consulting your System Administrator.

To verify or change any of these options, select Backup/Restore from the second Options Main 
screen. Doing so displays the Backup/Restore Main screen containing all related backup/
restore options and settings.

Note:

On the Backup/Restore Main screen, check the Automatic Backup setting to 
determine if your phone is already set for automatic backups. The default setting 
is Disabled, meaning automatic backup will not occur unless you change the 
setting to Enabled. If your system administrator has administered your Backup/
Restore Options to be disabled, you cannot enable them yourself.