Grandstream Networks GXP11O5 사용자 설명서

 

 

Grandstream Networks, Inc.                        GXP1100/1105 User Manual                                                      Page 18 of 34 

The  GXP110x operates in three modes: 
 

1.  DHCP mode: The GXP110x acquires IP address from the first DHCP server 

it discovers on the LAN. The DHCP option is reserved for NAT router mode. 
In DHCP mode, all the field values for the Static IP mode are not used. 

2.  PPPoE mode: Set PPPoE account ID, PPPoE password and PPPoE service 

name for the GXP110x to establish PPPoE sesstion. 

3.  Static IP mode: Configure IP address, Subnet Mask, Gateway, DNS Server 

1, DNS Server 2 and Preferred DNS Server if Static IP mode is used. 

This option allows the user to enable/disable 802.1x mode on the phone. The default 
value is disabled. To enable 802.1x mode, this field should be set to EAP-MD5. 
Once enabled, the user would be required to enter the following information below to 
be authenticated on the network: 
 

1. Identity 
2. MD5 

Password 

 

These options are used to assign a function to the corresponding multiple purpose 
key. Options available are:  

1.  Speed Dial 
2.  Dial DTMF 
3.  Call Return – Call the last answered number 
4.  3-way Conference 

 
Note: 
No UserID has to be configured in the MPK when using Call Return or 3-way 
Conference. 

This parameter controls the date/time display according to the specified time zone. 
If “Allow DHCP Option 2 to override Time Zone setting” is checked, the time zone will 
be overridden by the DHCP server. 

This parameter allows the users to define their own time zone.  
The syntax is: std offset dst [offset], start [/time], end [/time]  
Default is set to: MTZ+6MDT+5,M4.1.0,M11.1.0  
 
MTZ+6MDT+5,  
This indicates a time zone with 6 hours offset with 1 hour ahead which is U.S central 
time. If it is positive (+) if the local time zone is west of the Prime Meridian (A.K.A: 
International or Greenwich Meridian) and negative (-) if it is east.  
M4.1.0,M11.1.0  
The 1st number indicates Month: 1,2,3.., 12 (for Jan, Feb, .., Dec)  
The 2nd number indicates the nth iteration of the weekday: (1st Sunday, 3

rd

Tuesday…)  
The 3rd number indicates weekday: 0,1,2,..,6( for Sun, Mon, Tues,..,Sat)  
Therefore, this example is the DST which starts from the First Sunday of April to the 
1st Sunday of November.