Grandstream Networks GXP14XX 사용자 설명서

 

This section provides the known interoperability status of the Grandstream 
GXP21xx/GXV3140/GXV3175 with BroadWorks.  This includes the version(s) tested, 
capabilities supported and known issues. 

Interoperability testing validates that the device interfaces properly with BroadWorks via 
the SIP interface.  Qualitative aspects of the device or device capabilities not affecting the 
SIP interface such as display features, performance, and audio qualities are not covered 
by interoperability testing.  Requests for information and/or issues regarding these aspects 
should be directed to Grandstream. 

The following table identifies the verified Grandstream GXP21xx/GXV3140/GXV3175 and 
BroadWorks versions and the month/year the testing occurred.  If the device has 
undergone more than one test cycle, versions for each test cycle are listed, with the most 
recent listed first. 

Compatible Versions in the following table identifies specific Grandstream versions which 
the partner has identified as compatible and should interface properly with BroadWorks.  
Generally, maintenance releases of the validated version are considered compatible and 
may not be specifically listed here.  Contact Grandstream for any questions concerning 
maintenance and compatible releases. 

NOTE:  Interoperability testing is normally performed with the latest generally available (GA) 

device firmware/software and the latest GA BroadWorks release and service pack at the time the 
testing occurs.  If there is a need to use a non-verified mix of BroadWorks and device software 

versions, customers can mitigate their risk by self-testing the combination using the BroadWorks 

. 

01/2011 

Release 17.0 

GXP2120/GXP2110/GXP21
00/GXP1450:  1.0.1.39 

GXV3140:  1.0.7.3 

GXV3175:  1.0.1.4 

Any maintenance release of the 
verified versions. 

 

The Grandstream GXP21xx/GXV3140/GXV3175 has completed interoperability testing 
with BroadWorks using the BroadWorks SIP Access Device Interoperability Test Plan 

.  

The results are summarized in the following table. 

The BroadWorks test plan is composed of packages, each covering distinct 
interoperability areas, such as “Basic” call scenarios and “Redundancy” scenarios.  Each 
package is composed of one or more test items which in turn are composed of one or 
more test cases.  The test plan exercises the SIP interface between the device and