Polycom VVX 사용자 설명서

Fully insert the stand into one of 

the slots on the back of the 

Expansion Module. The slot you 

choose determines the angle of 

the Expansion Module. The 

phone and Expansion Module 

should be at the same angle.

*For wallmount installation, an optional accessory is available. For more information, contact your reseller. 

(either model)

Auxiliary Ports.

 

Connect the Cable 

Connector to one of these ports, and 

to an Auxiliary Port on the phone or 

another Expansion Module. 

(one on each side) to

hold Cable Connector

in place

Slots for

base stand

Line Keys

LED Indicators

Plastic cover overlaying
paper template.
Write phone lines, presence
contacts or speed dials
on the template.

Cut out in cover for easy
cover removal

Line Keys

LED Indicators

Page Keys. Press a
page key to
display more Line Keys.

Color Display

Note: The paper module has a plastic 
cover that overlays a paper template. To 
remove or insert the template, place the 
tip of a paperclip under the slot at the 
top-right corner of the cover, lift the cover 
off, and remove or insert the template. To 
re-attach the cover, align the six tabs on 
either side of the cover with the 
corresponding indents on the Expansion 
Module, and bend the cover into place. 

Holes for

thumb screws

(one on each side)

to anchor metal bracket