Polycom SIP 3.0.2 사용자 설명서
Administrator’s Guide SoundPoint IP / SoundStation IP
3 - 18
Supporting SoundPoint IP and SoundStation IP Phones
To automatically update:
1.
Back up old application and configuration files.
The old configuration can be easily restored by reverting to the backup
files.
The old configuration can be easily restored by reverting to the backup
files.
2.
Customize new configuration files or apply new or changed parameters
to the old configuration files.
Differences between old and new versions of configuration files are
explained in the Release Notes that accompany the software. Both
mandatory and optional changes may present. Changes to site-wide
configuration files such as sip.cfg can be done manually, but a scripting
tool is useful to change per-phone configuration files.
to the old configuration files.
Differences between old and new versions of configuration files are
explained in the Release Notes that accompany the software. Both
mandatory and optional changes may present. Changes to site-wide
configuration files such as sip.cfg can be done manually, but a scripting
tool is useful to change per-phone configuration files.
3.
Save the new configuration files and images (such as sip.ld) on the boot
server.
server.
4.
Reboot the phones by pressing the reboot multiple key combination.
For more information, refer to
For more information, refer to
on page
Since the APPLICATION APP_FILE_PATH attribute of the <Ethernet
address>.cfg files references the individual sip.ld files, it is possible to
verify that an update is applied to phones of a particular model.
For example, the reference to sip.ld is changed to 2345-11605-001.sip.ld to
verify that an update is applied to phones of a particular model.
For example, the reference to sip.ld is changed to 2345-11605-001.sip.ld to
boot the SoundPoint IP 601 image.
The phones can be rebooted remotely through the SIP signaling protocol.
The phones can be rebooted remotely through the SIP signaling protocol.
Refer to
on page
Warning
The SoundPoint IP 300 and 500 phones will be supported on the latest
maintenance patch release of the SIP 2.1 software stream—currently SIP 2.1.2.
Any critical issues that affect SoundPoint IP 300 and 500 phones will be addressed
by a maintenance patch on this stream until the End of Life date for these products.
Phones should be upgraded to BootROM 4.0.0 for these changes to be effective.
Warning
The configuration files listed in CONFIG_FILES attribute of the master configuration
file must be updated when the software is updated. Any new configuration files
must be added to the CONFIG_FILES attribute in the appropriate order.
Mandatory changes must be made or the software may not behave as expected.
For more information, refer to the “Configuration File Management on SoundPoint
Mandatory changes must be made or the software may not behave as expected.
For more information, refer to the “Configuration File Management on SoundPoint
www.polycom.com/support/voice/ .