Polycom SIP 3.0.2 사용자 설명서

Administrator’s Guide SoundPoint IP / SoundStation IP 

4 - 10

The directory is the central database for several other features including 
speed-dial, distinctive incoming call treatment, presence, and instant 

messaging.

Configuration changes can performed centrally at the boot server or locally:

An example of a local contact directory is shown below. The subsequent table 
provides an explanation of each element.

<?xml version=”1.0” encoding=”UTF-8” standalone=”yes” ?>

<directory>

<item_list>

If a user makes a change to the local contact directory, there is a five second 

timeout before it is uploaded to the boot server as <mac-address>-directory.cfg. 

Configuration file: 
sip.cfg

Set whether the directory uses volatile storage on the phone 

(required on the SoundPoint IP 500 platform for directories greater 

than 25 entries). 
•

For more information, refer to 

 on page 

Specify whether or not the local contact directory is read only.
•

For more information, refer to 

 on page 

XML file:
000000000000-direct
ory.xml

 

A sample file named 000000000000-directory~.xml (Note the extra 

“~” in the filename) is included with the application file distribution. 

This file can be used as a template for the per-phone <Ethernet 
address>-directory.xml

 directories (edit contents, then rename to 

<Ethernet address>-directory.xml

). It also can be used to seed 

new phones with an initial directory (edit contents, then remove “~” 

from file name). Telephones without a local directory, such as new 

units from the factory, will download the 00000000000-directory.xml 

directory and base their initial directory on it. These files should be 

edited with an XML editor. These files can be downloaded once per 

reflash.
For information on file format, refer to 

, the following section.

XML file: <Ethernet 
address>-directory.
xml

This file can be created manually using an XML editor. 
For information on file format, refer to 

, the following section.

Local Phone User 

Interface

The user can edit the directory contents if configured in that way. 
Changes will be stored in the phone’s flash file system and backed up 

to the boot server copy of <Ethernet address>-directory.xml if this 

is configured. When the phone boots, the boot server copy of the 

directory, if present, will overwrite the local copy.