Polycom SIP 3.0.2 사용자 설명서

Administrator’s Guide SoundPoint IP / SoundStation IP 

4 - 38

The phone allows automatic call distribution (ACD) login and logout. This 
feature depends on support from a SIP server. 
Configuration changes can performed centrally at the boot server:

Web Server 
(if enabled)

Specify the local SIP signaling port and an array of SIP servers to 

register to. 
Navigate to http://<phoneIPAddress>/appConf.htm#se
For up to six registrations (depending on the phone model, in this 

case the maximum is six even for the IP 601 and 650), specify a 

display name, a SIP address, an optional display label, an 

authentication user ID and password, the number of line keys to use, 

and an optional array of registration servers. The authentication user 

ID and password are optional and for security reasons can be omitted 

from the configuration files. The local flash parameters will be used 

instead. The optional array of servers will override the servers 

specified in sip.cfg in non-Null. This will also override the servers on 

the appConf.htm web page. 
Navigate to http://<phoneIPAddress>/reg.htm
Changes are saved to local flash and backed up to <Ethernet 
address>-phone.cfg

 on the boot server. Changes will permanently 

override global settings unless deleted through the Reset Local 

Config menu selection and the <Ethernet address>-phone.cfg is 

removed from the boot server.

Local Phone User 

Interface

Use the SIP Configuration menu to specify the local SIP signaling 

port, a default SIP server to register to and registration information for 

up to twelve registrations (depending on the phone model). The SIP 

Configuration menu contains a sub-set of all the parameters available 

in the configuration files.
Either the Web Server or the boot server configuration files or the 

local phone user interface should be used to configure registrations, 

not a mixture of these options. When the SIP Configuration menu is 

used, it is assumed that all registrations use the same server. 
Changes are saved to local flash and backed up to <Ethernet 
address>-phone.cfg

 on the boot server. Changes will permanently 

override global settings unless deleted through the Reset Local 

Config menu selection and the <Ethernet address>-phone.cfg is 

removed from the boot server.
For more information, refer to 

 on page 

 on page 

, and 

 on page 

Configuration file: 
sip.cfg

Turn this feature on or off.  
•

For more information, refer to 

 on page 

Configuration file: 
phone1.cfg

Enable this feature per registration.
•

For more information, refer to 

 on page