Avaya IP Softphone 전단

This Getting Started guide is intended for Avaya IP Softphone 
users who want to make and receive video calls. 

To handle video calls with Avaya IP Softphone, you will need:

●

Avaya IP Softphone Release 6.0 and Video Integrator 
software installed on your PC

●

a recommended USB web camera (such as Logitech Pro 
4000, Logitech Pro 5000, and Creative USB web cams) and 
its drivers installed on your PC

●

an extension that is properly administered for Avaya IP 
Softphone and video on a media server that is running 
Avaya Communication Manager Release 5.0 or later 
software. Contact your System Administrator to make sure 
that your company’s system supports video and that your 
extension is administered appropriately.

Avaya IP Softphone supports video calls in the following 
configurations:

●

Road Warrior configuration (voice over IP)

●

Control of Avaya Telephone (via the server) configuration

 PC Requirements

Your PC must meet the following minimum requirements to run 
Avaya IP Softphone R6.0 and Video Integrator:

●

IBM PC or compatible PC with an Intel Pentium III 1 GHz or 
compatible processor. A 1.5 GHz processor is required for a 
USB camera to use the H.264 codec.

●

a hard disk with at least 50 MB of space available

●

128 MB of RAM for the Control of Avaya Telephone (via the 
server) configuration.
256 MB of RAM for the Road Warrior configuration. 

●

8 MB of video memory

●

For Road Warrior configuration: speaker/headset and 
microphone

●

a network interface card for local area network connectivity

●

Microsoft Internet Explorer 6.0 or later

●

Microsoft DirectX 9.0b or later

●

One of the following operating systems:

- Microsoft Windows XP Home or Professional with Service 

Pack 1 or Service Pack 2

- Microsoft Windows 2000 Professional with Service Pack 3 

or higher

Make sure your PC meets the system requirements for your web 
camera.

Install your web camera and its drivers on your PC. Follow the 
instructions provided with your camera. 
NOTE:
If you have a Polycom ViaVideo II camera, do not install the drivers 
provided with your camera. These drivers will be installed 
automatically when you install the Avaya Video Integrator software.