Polycom 1725-16823-001 사용자 설명서

Deployment Guide for the Polycom VVX 1500 D Phone

2 - 4

Clamp a ferrite clamp around the cable.

Connect the 25-foot Network Cable to the LAN jack on the phone.

Connect the other end of the 25-foot Network Cable to an available 

LAN port on the wall or hub/switch device port.

Before you can allow users to place and answer calls you must make some 

basic configuration changes.
This section provides information for making configuration changes for:

To troubleshoot any problems with the Polycom VVX 1500 D phones on the 

network, refer to 

 on page 

.

For more information on all of the configuration parameters that you can 

change, refer to the latest Administrator’s Guide for the Polycom UC Software at 

.

The phone maintains a local clock and calendar. Time and date can be 

displayed in certain operating modes such as when the phone is idle and 

during a call. The clock and calendar must be synchronized to a remote Simple 

Network Time Protocol (SNTP) timeserver. The time and date displayed on 

the phone will flash continuously to indicate that they are not accurate until a 

successful SNTP response is received. The time and date display can use one 

of several different formats and can be turned off.
For instructions on turning off the time and date display, refer to 

AC power adapters are not included in the basic phone package. Using the 
supplied network cable, the phone can be powered from a Power over Ethernet 
(PoE) compliant switch or hub. Power over Ethernet is the default connection for 
the phone.