Polycom 1725-16823-001 사용자 설명서
Deployment Guide for the Polycom VVX 1500 D Phone
2 - 12
To set up the provisioning server:
1.
Create a directory to store the application image and the configuration
files.
For example, C:\test\VVX1500 .
For example, C:\test\VVX1500 .
2.
Extract all files from the distribution zip file to the newly created
directory.
Maintain the same folder hierarchy.
The distribution zip file contains many files, but only the following are
Maintain the same folder hierarchy.
The distribution zip file contains many files, but only the following are
required:
— 2345-17960-001.sip.ld
— 000000000000.cfg
— SoundPointIPWelcome.wav
— 2345-17960-001.sip.ld
— 000000000000.cfg
— SoundPointIPWelcome.wav
Refer to the Polycom UC Software Release Notes for a detailed description of
each file in the distribution. The Release Notes can be found at
.
3.
Start the FTP server and configure it to accept requests from the phone.
In the FTP server software on a computer, create a unique user with names
In the FTP server software on a computer, create a unique user with names
and passwords. For example, username user with password password.
Refer to your server documentation to set up the server.
Refer to your server documentation to set up the server.
Note
The instructions below are written using FTP server as the provisioning server, but
they also apply to any TFTP or HTTP server.
they also apply to any TFTP or HTTP server.
Note
The factory default username and password for the phone is PlcmSpIp.
Note
If you want your users to be able to change the language displayed on their phone,
all of the SoundPointIP-dictionary.xml files are also required.
all of the SoundPointIP-dictionary.xml files are also required.