Polycom 1725-11530-310 사용자 설명서
Administrator’s Guide SoundPoint IP / SoundStation IP
A - 36
Ring type <rt/>
Ring type is used to define a simple class of ring to be applied based on some
credentials that are usually carried within the network protocol. The ring class
includes attributes such as call-waiting and ringer index, if appropriate. The
ring class can use one of four types of ring that are defined as follows:
In the following table, x is the ring class number. The x index needs to be
sequential.
ring
Play a specified ring pattern or call waiting indication.
visual
Provide only a visual indication (no audio indication) of incoming call (no
ringer needs to be specified).
ringer needs to be specified).
answer
Provide auto-answer on incoming call.
ring-answer
Provide auto answer on incoming call after a ring period.
Note
The auto-answer on incoming call is currently only applied if there is no other call in
progress on the phone at the time.
progress on the phone at the time.
Attribute
Permitted Values
Interpretation
se.rt.enabled
0,1
Set to 1 to enable the ring type feature within the
phone, 0 otherwise.
phone, 0 otherwise.
se.rt.modification.enabled
0,1
Set to 1 to allow user modification through local
user interface of the pre-defined ring type enabled
for modification.
user interface of the pre-defined ring type enabled
for modification.
se.rt.x.name
UTF-8 encoded string
Used for identification purposes in the user
interface.
interface.
se.rt.x.type
ring OR visual OR answer
OR ring-answer
OR ring-answer
As defined in table above.
se.rt.x.ringer
integer - only relevant if the
type is set to ‘ring’ or
‘ring-answer’
type is set to ‘ring’ or
‘ring-answer’
The ringer index to be used for this class of ring.
The ringer index should match one of
The ringer index should match one of
se.rt.x.callWait
integer - only relevant if the
type is set to ‘ring’ or
‘ring-answer’
type is set to ‘ring’ or
‘ring-answer’
The call waiting index to be used for this class of
ring. The call waiting index should match one
defined in
ring. The call waiting index should match one
defined in
on page
.
se.rt.x.timeout
positive integer - only
relevant if the type is set to
‘ring-answer’. Default
value is 2000.
relevant if the type is set to
‘ring-answer’. Default
value is 2000.
The duration of the ring in milliseconds before the
call is auto answered. If this field is omitted or is left
blank, a value of 2000 is used.
call is auto answered. If this field is omitted or is left
blank, a value of 2000 is used.
se.rt.x.mod
0,1
Set to 1 if the user interface should allow for
modification by the user of the ringer index used for
this ring class.
modification by the user of the ringer index used for
this ring class.