Patton electronic SmartNode 4110 Series 사용자 설명서
Ethernet port configuration task list
143
SmartWare Software Configuration Guide
12 • Ethernet port configuration
Example: Configuring medium for an Ethernet port
The following example shows how to configure medium auto-sense for the Ethernet port on slot 0 and port 0
of a SmartNode 4524 device.
of a SmartNode 4524 device.
node(cfg)#port ethernet 0 0
node(prt-eth)[0/0]#medium auto
node(prt-eth)[0/0]#medium auto
Configuring Ethernet encapsulation type for an Ethernet port
This procedure describes how to configure the encapsulation type to IP for the Ethernet port on slot and port.
Mode: Configure
Example: Configuring Ethernet encapsulation type for an Ethernet port
The following example shows how to configure the encapsulation type to IP for the Ethernet port on slot 0 and
port 0.
port 0.
node(cfg)#port ethernet 0 0
node(prt-eth)[0/0]#encapsulation ip
node(prt-eth)[0/0]#encapsulation ip
Binding an Ethernet port to an IP interface
You must bind the Ethernet port to an existing IP interface. When executing the
bind
command, the
requested interface must exist. If no IP context is given, the system attaches the interface to the default IP con-
text known as router.
text known as router.
Step
Command
Purpose
1
node(cfg)#port ethernet slot port
Enters Ethernet port configuration mode for the
interface on slot and port.
interface on slot and port.
2
node(prt-eth)[slot/port]#encapsulation ip
Configures the encapsulation type to IP.