Avaya 16-601443 사용자 설명서

2. After entry of the command sequence, the following displays, based on the current value of 

the system value NVDEBUG:

If a value different from the current NVDEBUG value is entered, the following text displays 
left-justified at the top of the display:

3. Press the * button to terminate the procedure, or the # button to save the new value. If you 

press the # button, the telephone displays the following text:

The telephone saves the new value.

Use the following procedure to set or change the Group Identifier.

Note:

Perform this procedure only if the LAN Administrator instructs you to do so.
For more information about groups, see 

While the telephone is on-hook and idle, press the following sequence of keys on the faceplate 
of the telephone:

Mute 4 7 6 8 7 (Mute G R O U P) 

Note:

Press the Mute button momentarily. Do not press this button while pressing other 
keys/buttons. 

The following text displays left-justified at the top of the display:

where ddd is the Group value.

If NVDEBUG = 1:

Debug mode=on 

0=off #=OK 

If NVDEBUG = 0:

Debug mode=off 

1=on #=OK 

*=no    #=yes 

New value being saved 

New=_