Avaya 3910 사용자 설명서

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

The following tasks must be completed when programming the PBX to integrate.  

IMPORTANT NOTE: Although the integration uses the IP Softphone protocol for 
connectivity, they are defined within the PBX as 4-wire 7434ND (numeric 
display) sets.   

The tasks are as follows: 

•  Configure Switch System Settings 
•  Create Pilot number for the Voice Portal hunt group. 
•  Define the stations assigned to Voice Portal. 

NOTE:  A number of configuration shows screens that follow are shown 

displayed in the Avaya Site Administration GUI, also known as GEDI 
(Graphically Enhanced DEFINITY interface).  Screens and parameters 
may appear different depending on PBX software revision and load. 
Please note, for those using Definity System Administration the tabs on 
the following screens correlate to the page #s as displayed on the admin 
screens.  

5.1 SYSTEM PARAMETER FEATURES 

Under Parameters double-click change system-parameters features. 

Select tab 5 and verify that the field 7434ND? is set to “y”