Avaya VF 3000 사용자 설명서

 

 

 
The following Avaya Communication Manager provisioning is required to support the LSP 
Configuration. This provisioning is performed via the SAT interface. In the following example, 
the Avaya Communication Manager for LSP support is provisioned for site A1. Refer to [3] for 
additional configuration information for Avaya Communication manager. 
 

 
Avaya Communication Manager must be licensed to enable the special application “SA8853 
Support of LSPs behind NAT”.  
 
Step 1.  Use the “change system-parameters special-applications” command to enable the 
special application “SA8853 Support of LSPs behind NAT”. Select Esc-n to page for SA8853, 
select y and submit the changes as shown in Figure 6. 
 

 

Note: If this feature is installed as a patch (red feature) the feature will not show up on the Avaya 
Communication Manager SA form as shown above. In a subsequent GA release, the feature 
(green feature) will be part of the SA form, which can be enabled based on licensing. 
 

 

TC; Reviewed: 
PV 04/24/2006 

Avaya – Proprietary 

Use as authorized only pursuant to your signed agreement or 

Avaya policy. No other disclosure is permitted or authorized. 

15 of 61 

HT3-LSP-VF.doc