Avaya VF 3000 사용자 설명서
different enterprise customer. The Juniper VF 3000 SBC in the data center can make use of this
VLAN information to resolve overlapping IP address issues
VLAN information to resolve overlapping IP address issues
1
. The Juniper VF 3000 SBC
segregates the access traffic into separate customer streams and routes the traffic to the
respective Avaya Communication Managers based on the destination IP address. Figure 2 shows
only one enterprise network containing only a single site, but multiple sites (and multiple
enterprises using multiple Avaya Communication Manager instances) should be considered the
norm.
respective Avaya Communication Managers based on the destination IP address. Figure 2 shows
only one enterprise network containing only a single site, but multiple sites (and multiple
enterprises using multiple Avaya Communication Manager instances) should be considered the
norm.
Figure 2 - Private-Private Architecture
Initial deployments of the Avaya On Demand/Hosted solutions using the Juniper VF 3000 SBC
will use the architectures specified in Figure 1 or Figure 2. However, there is a third
will use the architectures specified in Figure 1 or Figure 2. However, there is a third
TC; Reviewed:
PV 04/24/2006
PV 04/24/2006
Avaya – Proprietary
Use as authorized only pursuant to your signed agreement or
Avaya policy. No other disclosure is permitted or authorized.
5 of 61
HT3-LSP-VF.doc
1
Different enterprises could use overlapping IP private addresses.