Aastra Telecom 6755i 사용자 설명서

116

Model 6755i IP Phone User Guide

 

The programmable method of configuration creates park and pickup keys that you can configure 
on the 6755i phone.

You can set a key as "Park" or "Pickup" and then:

•

specify a customized label to display on the Phone UI

•

specify a value

•

specify which line to use

•

specify the state of the park and/or pickup keys

On the IP phone UI, the Park/Pickup feature displays the following:

•

When a call comes in, and you pickup the handset, the custom label that you configured for 
the Park key displays on the Phone UI. 

•

After the call is parked, the label that you configured for the Pickup key displays on other 
phones in the network. You can then press the "Pickup" key, followed by the applicable 
value to pickup the call on another phone in your network.

You can configure a Park and Pickup programmable configuration using the Aastra Web UI.

On the 6755i, you configure a Park and/or Pickup key at Operation->Softkeys and XML. You 
enter a key label, and value for a specific line on the phone. The default state of the Park 
configuration is "connected". The default state of the Pickup configuration is "idle, outgoing".

Use the following procedure to configure the Park/Pickup call feature using the key 
configuration method.

Use the following procedure to configure a Park/Pickup key on the 6755i IP Phone. The 
procedure shows the softkey screen as an example.

Note: Applicable values depend on the server in your network 
(Asterisk, BroadWorks, Sylantro, ININ PBX. See the table 

.

Note: For values to enter in the “Value” fields, see the table 

 on 

.