Avaya 700217243 사용자 설명서
5 Programming Telephone Features
48
Automatic Line Selection
Quick Reference Guide
intercom line. This order can be changed, however, to accommodate your
business needs. For example, a telemarketing firm with a WATS line (line 5) to
reduce telephone expenses would set Automatic Line Selection for all
telemarketers’ extensions to “05, 01, 02, 03, 04, Intercom.” This way the WATS
line is selected first.
business needs. For example, a telemarketing firm with a WATS line (line 5) to
reduce telephone expenses would set Automatic Line Selection for all
telemarketers’ extensions to “05, 01, 02, 03, 04, Intercom.” This way the WATS
line is selected first.
At pooled extensions, with Automatic Line Selection at its factory setting, the
system first searches to find an available line in the main pool (pool 880 button 1,
then button 2). If all outside lines in the pool are busy, the system selects an idle
intercom line. However, you can change the order to accommodate a different
automatic line selection. For example, your boss prefers her individual line
(line 15) to be selected when she lifts the handset; then she wants auxiliary pool
881 to be selected, which is used for making international calls. To do this, set
Automatic Line Selection to “15, 881, Intercom.”
system first searches to find an available line in the main pool (pool 880 button 1,
then button 2). If all outside lines in the pool are busy, the system selects an idle
intercom line. However, you can change the order to accommodate a different
automatic line selection. For example, your boss prefers her individual line
(line 15) to be selected when she lifts the handset; then she wants auxiliary pool
881 to be selected, which is used for making international calls. To do this, set
Automatic Line Selection to “15, 881, Intercom.”
If a single-line telephone user intends to place intercom calls and access system
features, Automatic Line Selection for his or her extension should be set to
intercom first for proper operation.
features, Automatic Line Selection for his or her extension should be set to
intercom first for proper operation.
To program Automatic Line Selection for an extension:
1
Press
f00ssc
at extension
10 or 11.
2
Enter the number of the extension to be programmed for Automatic Line
Selection.
Selection.
3
Press
**
.
4
Press the line, pool, or
i
buttons in the desired order. The valid
entries for Automatic Line Selection depend upon the type of extension:
• Key Extension: Outside system lines, Left Intercom (the factory setting)
✔
• Pooled Extension: Pool 880 button 1, button 2, Left Intercom, Right
Intercom (the factory setting), Pools 881-883, individual lines
5
To exit Automatic Line Selection, press
**
.
6
Press
c
and enter a new extension number, or exit
programming mode.