Aastra Telecom 41-001343-02 사용자 설명서
Operational, Basic, and Advanced Parameters
A-101
41-001343-02 REV04 – 05.2014
Parameter –
sip customized codec
sip customized codec
Configuration Files
aastra.cfg, <model>.cfg, <mac>.cfg
aastra.cfg, <model>.cfg, <mac>.cfg
Description
Specifies a customized codec preference list which allows you to select the preferred codecs for this IP
phone. You can enter up to 10 codec preferences.
phone. You can enter up to 10 codec preferences.
Note:
Enabling or disabling silence suppression (sil supp) enables/disables it for all codecs in the customized
list. When mismatch occurs in the configured silsupp parameter, the first one specified in the parameter
value will be used.
Enabling or disabling silence suppression (sil supp) enables/disables it for all codecs in the customized
list. When mismatch occurs in the configured silsupp parameter, the first one specified in the parameter
value will be used.
Format
Comma-separated list of semicolon-separated values
Default Value
Not Applicable
Range
Valid values for the syntax are:
payload:
Configuration Files
Web UI
0 - G711u/8000
G.711u (8K)
8 - G711a/8000
G.711a (8K)
9 - G722/8000
G.722
18 - G729/8000
G.729
96 - G726-40/8000
G.726-40
97 - G726-24/8000
G.726-24
98 - G726-16/8000
G.726-16
106 - BV16/8000
BV16 (8K)
107 - BV32/16000
BV32 (16K)
110 - G711u/16000
G711u (16K)
111 - G711a/16000
G711a (16K)
112 - L16/8000
L16 (8K)
113 - L16/16000
L16 (16K)
115 - G726-32/8000
G.726-32
118 - AMR G.722.2
AMR (Licensed feature for 6735i , 6737i, 6863i, 6865i, and 6867i only )
119 - AMR-WB G.722.2
AMR-WB (Licensed feature for 6735i , 6737i, 6863i, 6865i, and 6867i only )
Leave blank for all codecs
All (Codec 1 only)
Basic (Codec 1 only)
None (Codecs 2 thru 10 only)
Basic (Codec 1 only)
None (Codecs 2 thru 10 only)
ptime (in milliseconds) 5, 10, 15, 20........90
silsupp on, off
Note:
The “silsupp” value is either ON for all codecs or OFF for all codecs.
The “silsupp” value is either ON for all codecs or OFF for all codecs.
Example
sip customized codec: payload=18;ptime=10;silsupp=on,payload=0;ptime=10;
silsupp=on
silsupp=on