Aastra Telecom 41-001343-02 사용자 설명서

41-001343-02 REV04 – 05.2014

callers - Indicates the key is configured to access the Callers List. 

redial - Indicates the key is configured to access the Redial List.

conf - Indicates the key is configured as a Conference key.

xfer- Indicates the key is configured as a Transfer key for transferring calls.

icom - Indicates the key is configured to be used as the Intercom key.

services - Indicates the key is configured to be used as the Services key.

phonelock - Indicates the key is configured to be used to lock/unlock the phone.

paging - Indicates the key is configured for Group Paging on the phone. Pressing this 
key automatically sends a Real Time Transport Protocol (RTP) stream to pre-config-
ured multicast address(es) without involving SIP signaling.

empty - Indicates the key is configured to force a blank entry on the IP phone display 
for a specific key. 

The softkeys are added in order (from softkey1 to softkey20) after any hardcoded keys 
have been added.  If a particular softkey is not defined, it is ignored.

Text

none

none
line
speeddial
dnd ("Do Not Disturb" in the Aastra Web UI)
blf
list ("BLF/List" in the Aastra Web UI)
acd (“Auto call distribution” in the Aastra Web UI)
dcp (“Directed Call Pickup” in the Aastra Web UI)
xml
flash
sprecode
park
pickup
lcr
callforward
blfxfer
speeddialxfer
speeddialconf
speeddialmwi
directory
filter
callers (“Callers List” in Aastra Web UI)
redial
conf
xfer
icom
services
phonelock
paging
empty

softkey1 type: line
softkey2 type: speeddial
softkey3 type: lcr
softkey4 type: xml

softkey2 type: dcp
softkey2 label: dcp2200
softkey2 value: 2200
softkey2 states: incoming outgoing idle connected

softkey3 type: dcp
softkey3 label: gcp_A
softkey3 value: groupcallpickup
softkey3 states: incoming outgoing idle connected