Siemens A30853 사용자 설명서

kap01.fm5

27.11.98

Profiset 30isdn engl.: A30853-X300-B107-1-7619

You can temporarily park a call in order to

●

reactivate it at a later stage

●

resume it at another telephone

●

unplug your telephone from one socket and plug it 

into another

The telephone must not be parked for more than three 

minutes, as otherwise the call will be disconnected.

You can resume a parked call from the same telephone or 

from a different telephone (it must be connected to the 

same S

0

 bus).

Prerequisite: A call is parked and you are not conducting a 

call.

d

A call is in progress. 

S04

Press the Programming key and enter the code “04“ for 

“Parking a call“.
The stored connection code is indicated on the display.
The connection code is a number under which the call 

can be parked and later resumed.
If the call is to be parked under a different connection 

code, the connection code must have been changed 

beforehand (➔ page 34).

S and b

Press the Programming key again and replace the hand-

set.

The call is now parked for a maximum period of 3 minutes.

A call can only be parked, if is connected to the 

same S

0

 bus.

a

Handset is on-hook.

S04

Press the Programming key and enter the code “04“ for 

“Parking/resuming a call“.
The connection code is indicated on the display. If the call 

was parked under a different connection code, change 

the connection code beforehand (➔ page 34).

S and c

Press the Programming key again and lift the handset.

You are now re-connected to the parked caller.

You can cancel a programming procedure 

without making any changes by pressing the 

Disconnect key 

h

 !