Siemens A30853 사용자 설명서

kap01.fm5

27.11.98

Profiset 30isdn engl.: A30853-X300-B107-1-7619

You can clear any of the following memories via input of certain 

codes:

●

“0“ clear the destination dialling memory

●

“1“ clear the speed dialling memory

●

“2“ clear the call list memory

●

“3“ clear the number redial memory

You can check the settings of your Profiset 30isdn. The display 

shows the two-digit code (➔ page 27: ”Programming the tele-

phone settings“, ”Programming keys on the telephone“) which 

you start each programming procedure with and the currently 

set value. If the setting allows more than one value (e.g. MSN 1, 

2 and 3, destination dialling keys 1 and 2, speed dialling keys 0-

9 a.s.o.) each memory and the relevant setting are displayed.

You can scroll forward and backward using the keys 

+

 and 

-

.

The symbol “_“ on the display indicates values which are not 

yet set (e.g. not assigned MSN, destination dialling or speed di-

alling keys)

You can view the current settings of the lock by entering the 

code “30“.  The values displayed under the codes “40“ and “41“ 

could be necessary if you contact the hotline.

a

Handset is on-hook.

S25

Start the programming procedure.

T

Enter the password if necessary.

0 ... 3

Press one of the keys  0 ... 3.

S

Exit the programming procedure. The selected memory 

is cleared.

a or d

Handset is on-hook, or a call is in progress.

S00

Start the programming procedure.

T

Enter the password if necessary.

+ / -

Scroll through the settings via the +/-  keys.

S

Exit the programming procedure.