Siemens 300Series 사용자 설명서
5-14
ROLMphone 300/600 Series User Guide
To place a call on
system hold on a
non-display
phone or a dis-
play phone with-
out a System Hold
key
system hold on a
non-display
phone or a dis-
play phone with-
out a System Hold
key
➩
Press the Transfer (TRANSFR) key.
You will hear the confirmation tone,
followed by the dial tone.
followed by the dial tone.
➩
Dial * 8.
➩
Dial the number of the slot to which you
want to assign the call (0 through 9). 0n
display phones, CALL PARKED IN SLOT
and the number of the slot to which the call
has been assigned are displayed.
want to assign the call (0 through 9). 0n
display phones, CALL PARKED IN SLOT
and the number of the slot to which the call
has been assigned are displayed.
You will hear the confirmation tone.
➩
Hang up.
➩
Notify the party who will be retrieving the
call of the assigned slot number.
call of the assigned slot number.
Note:
If you hear a busy tone, press the Connect key to return to your
party. Then try the whole procedure again using a different
slot number. If you hear a fast busy tone, there are no system
slots available at this time.
party. Then try the whole procedure again using a different
slot number. If you hear a fast busy tone, there are no system
slots available at this time.
To retrieve a call
on system hold
on system hold
➩
Get a dial tone.
➩
Press the System Hold (SYSHOLD) key,
or dial * 8. If you have a display telephone,
ENTER PARK SLOT NUMBER is
displayed.
or dial * 8. If you have a display telephone,
ENTER PARK SLOT NUMBER is
displayed.
➩
Dial the number of the system slot.
➩
Begin speaking. If you do not have a
speakerphone, you must pick up the
handset to speak to the other party.
speakerphone, you must pick up the
handset to speak to the other party.