Siemens Gigaset 8825 사용자 설명서
IMPORTANT: You are now ready to use the corded handset. See
other sections of this Quick Start Guide for additional base setup
and cordless handset setup.
For best reception, place the base in a high central location, away
from other electrical devices. The installation of the base unit should
allow at least 8-inches between the base and persons to be in
compliance with FCC exposure guidelines.
Bottom view of base
Customer Care: 1-888-777-0211
Or visit our Website: www.icm.siemens.com
Visite nuestro sitio Web para obtener instrucciones en español.
Base Station Setup
1
Plug corded handset into unit.
2
Plug power supply into base unit and wall outlet. Secure wire into
cable channel lock.
3
Upwrap the Y phone line cord.
a.
If you have 2 lines coming out of the same wall jack, plug the single
connector into the wall and the two other ends into the back of the
base unit. Observe markings on base and line cord for L1 and L2.
b.
If you have 2 separate wall jacks, plug the 2 ends into each wall
jack and the single end into the back of the base in the slot marked
Line1 + (Line 2).
c.
If you have a single line, plug the single connector into the wall and
the two other ends into the back of the base unit. Observe mark-
ings on base and line cord for L1 and L2. It will not damage phone
to plug it into L2 if you only have one phone line.
2
1
3
L2 L1(+L2)