Siemens A31008-A200-J101-2-7619 사용자 설명서

Gigaset A200 / IM eng / A31008-A200-J101-2-7619 / appendix.fm / 12.06.2003

Wipe the base station and handset with a damp cloth or with an antistatic wipe. A dry 

cloth must never be used. This can cause static discharge. 

Should the handset come in contact with liquid, under no circumstances switch on 

the device. Remove all batteries immediately.
Allow the liquid to drip out of the device and afterwards dab all parts dry.
Place the handset without the batteries in a warm, dry place for at least 72 hours. In 

many cases it will subsequently be possible to put the phone into service again.

The following settings are only necessary if your PABX requires them, please refer to 

the operating instructions for your PABX. 

You have the following options for the dialling procedure:

◆

Tone dialling (DTMF),

◆

Pulse dialling (IWV).

¢

¢

¢

¢

¢

¢

[__________] [______]

 OK

Select dialling procedure and confirm. 
Long press (return to idle status). 

i

Temporary switch to tone dialling (DTMF)
If your PABX works with pulse dialling but you need tone dialling for a call 

(e.g. to listen to an external mail box/answering machine), you must 

switch to pulse dialling during the call.
Requirement: You have already started the call.
MENU 

¢

[__________] [______]

 OK

Select flash time (80 ms, 100 ms, 120 ms, 180 ms, 

250 ms, 300 ms or 600 ms) and confirm.
Long press (return to idle status).