Siemens OPENSTAGE 60 사용자 설명서
Getting to know your OpenStage phone
21
Programmable sensor keys
Your OpenStage 80 has nine (OpenStage 60: eight) illuminated sensor
keys. You can assign functions or numbers to them.
keys. You can assign functions or numbers to them.
To open the programming menu, press and hold down the relevant sensor
key
key
To activate the programmed function, briefly press the relevant key
Æ page 70.
Æ page 70.
Depending on how they are programmed, you can use the sensor keys as:
•
•
Function keys
•
Repdial keys
•
Touch the key briefly to activate the programmed function or dial the stored
number
number
Press and hold down the function key to open a menu for programming it.
Repdial keys and direct station selection keys can only be programmed via
the Program/Service menu
Repdial keys and direct station selection keys can only be programmed via
the Program/Service menu
A label for the function is displayed to the left of the key; it cannot be
changed. You can define the labeling for repdial or DSS keys according to
your requirements
changed. You can define the labeling for repdial or DSS keys according to
your requirements
The status of a function is shown by the LED on the corresponding sensor
key.
key.
Meaning of LED displays on function keys
Increase the number of programmable sensor keys by connecting a
key module
key module
LED
Meaning of function key
S
Off
The function is deactivated.
T
Flashing
1
[1] In this manual, flashing sensor keys are identified by this icon, regardless of the flashing in-
terval. The flashing interval represents different statuses, which are described in detail in
the corresponding sections of the manual.
the corresponding sections of the manual.
The function is in use.
R
On
The function is activated.