Siemens Gigaset SL56 사용자 설명서

Gigaset SL56 / IM1 EN / A31008-M1752-R111-2-6Z19 / start_guide_time.fm / 24.7.07

¤

Then press it into the housing from 

above until the bracket on the side of 

the battery back snaps securely into the 

housing.

To remove the battery pack, you must first 

press the bracket on the side.

¤

First, align the notches on the side of 

the battery cover with the protrusions 

on the inside of the housing.

¤

Then press the cover until it clicks into 

place.

There are notches for attaching the belt 

clip on the side of the handset at the same 

height as the display.

¤

Press the belt clip onto the back of the 

handset so that the protrusions on the 

belt clip engage with the notches.

¤

If fitted, remove the belt clip.

¤

Lift the device with the keypad in the 

palm of your hand.

¤

Insert your index finger into the notch 

on the lower edge. 

¤

Carefully lift the cover upwards out of 

the notches.

A Gigaset SL56 handset can be registered 

to up to four base stations. 
You must initiate handset registration on 

the handset and on the base station. 
After it has registered, the handset returns 

to idle status. The internal number of the 

handset appears in the display, e.g. 

. 

If it does not, repeat the procedure.

To find out how to register the handset on 

the base station, see the user guide for the 

base station.

w

¢

Ð

¢

¢

s

Select base station, e.g. 

, and press 

.

~

Enter the system PIN for the 

base station and press 

 

(depending on the base sta-

tion). The following flashes in 

the display, e.g. 

.