Siemens Gigaset M49AM 사용자 설명서

21

the others will still be sounding. Or press again the Paging key on 
the base to stop paging all handsets. 
Note: If there is no answer, the paging will stop in 2 minutes. 

In standby, press the INT key on the base, you will see “Paging 
Extension?” on the display. Then press one handset number. 
(Press 1 2, 3 or 4 that stands for the corresponding handset). 
The relevant handset will sound. 
Press the INT key or the Talk key on the handset to start 
inter-talking. 
Press the INT key on the base or the handset to end the 
inter-talking. 

In standby, press the INT key on the handset. 
You will see “Paging Extension?” on the display. Then press “0” 
to page the base, or the handset number (1, 2, 3 or 4) to page the 
handset(s).
The base or the relevant handset(s) will sound. 
Press the INT key or hands-free key on the base to start 
inter-talking with the handset. “Intercom” will appear on both the 
handset and the base. You can also press the INT key or Talk key 
on the other handsets to inter-talk with the handset. Then, 
“Intercom” will appear on the display of both handsets. 
Press the INT key on the base or INT key or End key on the 
handset to end the inter-talking. 

Note:

1. When then handset is inter-talking and a call comes in, it 

will ring. Press the Talk/Flash key on either side to answer 
the incoming call. 

2. If you have entered the name of the handset on 

registration, the name will be displayed on the screen of 
the other handset. 

3. The paging ring will last 2 minutes. If the paged handset 

does not answer, the paging handset will ring, “No 
Answer” will be displayed on its display and it will return 
automatically to Standby status. 

When you are answering a call, you can transfer the call to the 
base or another handset.