Siemens HiPath 3000 HiPath 5000 RSM 사용자 설명서
Step by Step
Making Calls – Convenience Functions
28
After a Speaker Call (Announcement) in a
Group
Group
If this function has been configured (contact the service
personnel), you can use a speaker call (announcement,
Æ Page 20) to announce a call in progress to a group of
users
personnel), you can use a speaker call (announcement,
Æ Page 20) to announce a call in progress to a group of
users
After a member of the group has accepted the call re-
quest, you can transfer the waiting party.
quest, you can transfer the waiting party.
Precondition: You are conducting a call.
qld
Press the key. LED flashes. Enter the code.
o
w
Enter the group’s station number.
s
Announce the call.
When a member of the group accepts the call, you are
connected to this party.
When a member of the group accepts the call, you are
connected to this party.
t
Replace the handset.
Trunk Flash
To activate ISDN-type services and features through the
network carrier’s analog trunks or those of other com-
munications platforms (such as "consultation hold"), you
must send a signal to the trunks before dialing the serv-
ice code or telephone number.
network carrier’s analog trunks or those of other com-
munications platforms (such as "consultation hold"), you
must send a signal to the trunks before dialing the serv-
ice code or telephone number.
Precondition: You have set up an external connection
via an analog line.
via an analog line.
qie
Press the key. LED flashes. Enter the code.
o
Enter the service code and/or telephone number.
Consultation
If the connection between the two other parties
is not established within 45 seconds, the call
from the first party returns to you (recall).
is not established within 45 seconds, the call
from the first party returns to you (recall).
Consultation