Siemens HIPATH 8000 사용자 설명서

With 

Call forwarding unconditional, all incoming calls 

are forwarded to a different destination.

 

You can use the feature code to activate/deactivate this 
function and define a forwarding destination.

^

Lift the handset.

j

Enter the code, for example, *72 (contact your service 
personnel).

Z

Wait until you hear the confirmation tone.

j

Enter the number of the phone to which you want to 
forward the calls. 

Z

Wait until you hear the confirmation tone. 

If the "Courtesy call" function is active, the System dials 
the phone to which you forwarded your calls.
•

If the party at this phone answers, you can inform 
him or her that your calls are being forwarded.

•

If the party does not answer or the station is busy, 
activate the feature once again. If you complete this 
operation within two minutes, you will hear the con-
firmation tone followed by the dial tone. The System 
does not output an acoustic signal to inform the oth-
er party at the forwarding destination about the sec-
ond activation. 

If 

Call forwarding unconditional is active, calls for-

warded when the line is idle are signaled by a short ring 
burst (around  0.5 seconds) at the forwarded station. 
This is a reminder that this feature is active. 

^

Lift the handset.

j

Enter the code, for example, *73 (contact your service 
personnel).