Siemens Gigaset S450 사용자 설명서

다운로드
페이지 58
6
First Steps
Gigaset S450 / English for Greece / A31008-M1716-T101-1-8U19 / starting.fm / 07.09.2005
Please note: 
u The mains adapter must be always 
connected, as the phone will not 
operate without mains connection.
u If you buy a replacement phone cord 
from a store, ensure that the phone 
jack is connected correctly.
Setting up the handset for use
Inserting the batteries 
¤
Fit the batteries with the correct 
polarity (see diagram).
The polarity is indicated in/on the battery 
compartment.
Closing the battery cover 
¤
First align the notches on the side of 
the battery cover with the lugs on the 
inside of the casing.
¤
Then press the cover so that it clicks 
into place.
Attaching the belt clip
There are notches for attaching the belt 
clip on the side of the handset at the same 
height as the display.
¤
Press the belt clip onto the back of the 
handset so that the protrusions on the 
belt clip engage with the notches. 
Opening the battery cover
¤
If fitted, remove belt clip.
¤
Insert a fingernail or a small 
screwdriver between the notch for the 
belt clip and the cover. Lift the whole 
cover up and out of the locators.
Correct phone jack assignment 
1 unused
2 unused
3 a
4 b
5 unused
6 unused
Caution: 
Use only the rechargeable batteries 
recommended by Siemens (page 45). Never 
use conventional (non-rechargeable) 
batteries or other battery types as this may 
cause significant damage to health and 
property. For example, the outer casing of the 
batteries could be destroyed or the batteries 
could explode. The phone could also 
malfunction or be damaged as a result of 
using batteries that are not of the 
recommended type.

2
1