Motorola PCS telephone 사용자 설명서
About Your Phone, Battery, and SIM Card
11
Your Battery
Charging a New Battery
To ensure maximum battery performance, a new battery (or
battery that has not been used for several months) should be
charged for about 3-4 hours before use.
battery that has not been used for several months) should be
charged for about 3-4 hours before use.
A
A new NiMH battery may require several full charge/discharge
cycles in order to achieve its optimum performance.
cycles in order to achieve its optimum performance.
After this initial charge, you can recharge your battery at your
convenience, using the phone’s rapid travel charger.
convenience, using the phone’s rapid travel charger.
A
See the chart on page 15 for charge times.
Important Battery Information
To ensure that you enjoy maximum battery life and use your
battery to its fullest capacity:
battery to its fullest capacity:
•
Always use Motorola approved battery chargers.
•
For the best results, Li-Ion batteries should be charged using
the E•P Desktop Charger, or your phone’s internal charger.
the E•P Desktop Charger, or your phone’s internal charger.
•
The battery should be at or near room temperature when
charging.
charging.
•
When not in use, store your battery uncharged in a cool, dark
and dry place.
and dry place.
! Do not leave a NiMH battery connected to any charger for
longer than 24 hours.
Handling Batteries
Your new batteries are fitted with protective covers. These covers
must be removed before the battery can be used. Save the covers
to carry and store batteries which are not in use. Covers prevent
electrically conductive objects from making contact with the
battery terminals, thereby reducing the risk of injury or damage
from a battery short circuit.
must be removed before the battery can be used. Save the covers
to carry and store batteries which are not in use. Covers prevent
electrically conductive objects from making contact with the
battery terminals, thereby reducing the risk of injury or damage
from a battery short circuit.
Removing the Main Battery Cover
1
1
Press and hold the release latch.
2
Press the battery upwards, out of its cover.
Fitting the Main Battery Cover
1
1
Lower the side of the battery opposite the release latch into
the cover.
the cover.
2
Lower the side of the battery with the release latch into the
cover until the latch clicks into place.
cover until the latch clicks into place.
Removing the Auxiliary Battery Cover
1
1
Hold the battery securely with one hand.
2
With the thumb of your other hand, press the base of the
cover upwards. Continue this action until the cover slides free
from the pins on the bottom of the battery.
cover upwards. Continue this action until the cover slides free
from the pins on the bottom of the battery.
3
Swing the cover away, clear of the battery.
Fitting the Auxiliary Battery Cover
1
1
Slide the narrow end of the cover into the small grooved hook
on the top of the battery.
on the top of the battery.
2
Push the cover firmly upwards until the base of the cover slides
past the battery pins; then release.
past the battery pins; then release.