Mitel 5360 사용자 설명서

다운로드
페이지 114
Page iv
Mitel
®
 5360 IP Phone User Guide – Issue 2, February 2011
Answering Calls
Lift the handset, or press 
 (Speaker) to 
answer a call while using a headset or to answer 
a call in Handsfree Mode. 
Placing Emergency Calls
Dial the emergency number (911 U.S. or 
999/112 Europe). The system immediately places 
the emergency call as soon as you dial the 
number, even if you do not select an outside line.
Placing Internal (Intercom) Calls
With or without the handset lifted, dial the 
extension number. If you enter incorrect digits, 
you can press 
 (Hold) to move the cursor 
backward, deleting the last digits entered. If you 
are using Handsfree Mode, listen for the double 
tone, and then begin to speak.
Placing External Calls
Press the Outgoing button, an unlit Call button, 
or enter the Outgoing Call access code (8 is the 
default code), and then dial the number.
Redialing External Numbers
With or without the handset lifted, press the
 
 (Redial). The system automatically selects 
a line and dials the number.
Transferring Calls to Other Extensions
1.  While on the call, press 
 (Transfer), and 
then enter the extension number.
2.  Do one of the following:

Wait for an answer, announce the call, and 
then hang up. If the extension is 
unavailable, press the flashing IC or Call 
button to return to the caller.

Hang up to transfer the call and disconnect 
the call from your IP phone.
Forwarding Calls
1. Press the Fwd button, and then enter the feature 
code, if applicable. ENTER FORWARD DEST 
appears. 
2.  Enter the extension number, or press the 
Outgoing button or enter the Outgoing Call 
access code (8 is the default code), and then dial 
the telephone number.
Placing Ad Hoc Conference Calls
1.  While on the first call, press the Conf button to 
place the call on hold. CALL NEXT PARTY TO 
CNF appears.
2.  Place a call to the next conference party. For 
external calls, press the Outgoing button or 
enter the Outgoing Call access code (8 is the 
default code), and then dial the number.
3.  After the party answers, announce the 
conference, and then press the Conf button to 
place the call on hold. If necessary, repeat this 
step to add the remaining conference party.
4. Press the Conf button again to start the 
conference. CNF IN PROGRESS appears.
Viewing and Responding to Messages
1.  With the handset on-hook, press
 
 (Message) 
or the VIEW MESSAGE menu button. Messages 
are displayed as first in/first out. If there is more 
than one message, you can repeatedly press 
 (Message) to scroll through the messages. 
2.  When the desired message is displayed, press #, 
or lift the handset for privacy, and then press to 
respond. (If your handset is off-hook and you 
press 
 [Message], you automatically place a 
call to the party or message center who left the 
message.)
Using Do-Not-Disturb
1. Press the DND button, and then do one of the 
following:

Press 
 (Up) or 
 (Down) to scroll 
through the messages.

Enter the two-digit number for the DND 
message.
2. If applicable, enter the additional text for the 
DND description. 
3.  Press 
(Speaker), or lift and replace the 
handset. 
Placing a Page Announcement
1. Press 7.
2.  Enter the page-zone number (0 to 9).
3.  After the tone, make your announcement, and 
then hang up.