Panasonic KX-TG9382 사용자 설명서
Intercom/Locator
44
For assistance, please visit http://www.panasonic.com/help
Intercom
Intercom calls can be made:
– between the handset and base unit
– between handsets
– between handsets
Note:
L
If you receive an outside call while talking on the
intercom, an interrupt tone will be heard (page
29).
intercom, an interrupt tone will be heard (page
29).
– To answer the call with the handset, press
{
OFF}, then press {C}. You can also
answer the call by pressing {LINE 1} or
{
{
LINE 2} after hanging up the intercom.
– To answer the call with the base unit, press
{
SP-PHONE} 2 times. You can also answer
the call by pressing {LINE 1} or {LINE 2}
after hanging up the intercom.
after hanging up the intercom.
L
When paging unit(s), the paged unit(s) beeps for
1 minute.
1 minute.
Making an intercom call
1
{
INTERCOM}
2
To page the base unit, press {0}.
To page another handset, enter its extension
number.
To page another handset, enter its extension
number.
L
To stop paging, press {OFF}.
3
When you finish talking, press {OFF}.
1
Proceed with the desired operation.
■ When 1 handset is registered:
■ When 1 handset is registered:
Press {INTERCOM}.
■ When 2 or more handsets are registered:
Press {INTERCOM}.
– To page a specific handset, enter the
handset number.
– To page all handsets, press {0} or wait for
a few seconds.
L
To stop paging, press {INTERCOM}.
2
When you finish talking, press {INTERCOM}.
Answering an intercom call
1
Press {C} to answer the page.
2
When you finish talking, press {OFF}.
1
Press {INTERCOM} to answer the page.
2
When you finish talking, press {INTERCOM}.
Note for handset and base unit:
L
The ringer volume for intercom calls follows the
higher volume level of the 2 lines (page 30).
Even when the ringer volume for both lines is set
to off (page 30), the handset and/or base unit
still rings at the low level for intercom calls.
higher volume level of the 2 lines (page 30).
Even when the ringer volume for both lines is set
to off (page 30), the handset and/or base unit
still rings at the low level for intercom calls.
Handset locator
You can locate a misplaced handset by paging it.
1
Base unit:
{LOCATOR}
{LOCATOR}
L
All registered handsets beep for 1 minute.
2
To stop paging:
Handset:
Press {C}, then press {OFF}.
Base unit:
Press {LOCATOR}.
Handset:
Press {C}, then press {OFF}.
Base unit:
Press {LOCATOR}.
Note:
L
Even when the ringer volume for both lines is set
to off (page 30), the handset still rings at the low
level for paging.
to off (page 30), the handset still rings at the low
level for paging.
Y Handset
[ Base unit
Y Handset
[ Base unit
TG938x(e).book Page 44 Friday, July 3, 2009 10:10 AM