Panasonic KX-TG4382AL 사용자 설명서
Useful Information
43
Battery recharge
Making/answering calls, intercom
*1 KX-TG4391/KX-TG4392/KX-TG4393/KX-TG4394
Problem
Cause/solution
The handset beeps and/or
7
7
flashes.
L
Battery charge is low. Fully charge the
batteries (page 14).
batteries (page 14).
I fully charged the batteries, but
7
7
still flashes or 8 is
displayed.
L
Clean the charge contacts and charge again
(page 14).
(page 14).
L
It is time to replace the batteries (page 13).
I fully charged the batteries, but
the operating time seems to be
shorter.
the operating time seems to be
shorter.
L
Clean the battery ends (S, T) and the
charge contacts with a dry cloth, and charge
again.
charge contacts with a dry cloth, and charge
again.
Problem
Cause/solution
Noise is heard, sound cuts in
and out.
and out.
L
You are using the handset or base unit in an
area with high electrical interference. Place
the base unit and use the handset away from
sources of interference.
area with high electrical interference. Place
the base unit and use the handset away from
sources of interference.
L
Move closer to the base unit.
L
If you use a DSL/ADSL service, we
recommend connecting a filter (contact your
DSL/ADSL service provider) to the telephone
line between the base unit and the telephone
line socket. Contact your DSL/ADSL provider
for details.
recommend connecting a filter (contact your
DSL/ADSL service provider) to the telephone
line between the base unit and the telephone
line socket. Contact your DSL/ADSL provider
for details.
The handset does not ring.
L
The ringer volume is turned off. Adjust the
ringer volume (page 23).
ringer volume (page 23).
L
Night mode is turned on. Turn it off (page 25).
The base unit does not ring.
L
The ringer volume is turned off. Adjust the
ringer volume (page 17).
ringer volume (page 17).
I cannot make a call.
L
The handset is too far from the base unit.
Move closer and try again.
Move closer and try again.
L
If the above remedy does not solve the
problem, set the dialling mode. Press
{
problem, set the dialling mode. Press
{
MENU} {#} {1} {2} {0} {Save} {OFF}.
L
The unit is not designed to be used with
rotary/pulse dialling services.
rotary/pulse dialling services.
TG43xxAL(e)_OI.book Page 43 Friday, May 23, 2008 3:51 PM