Panasonic KX-TS4200 사용자 설명서
Making/Answering Calls
30
For assistance, please visit http://www.panasonic.com/phonehelp
Flash time
The flash time depends on your
telephone exchange or host PBX. You
can select the following flash time: 80
ms
telephone exchange or host PBX. You
can select the following flash time: 80
ms
, 100 ms, 200 ms, 300 ms, 400 ms,
500 ms
, 600 ms, and 700 ms.
The default setting is “600 ms”.
Important:
L
L
Make sure that the unit is in standby
mode.
mode.
1
Press {MENU/SET}.
2
Select “Phone Setup”, then press
{
{
MENU/SET}.
3
Select “Flash Time”, then press
{
{
MENU/SET}.
4
Select the desired setting, then press
{
{
MENU/SET}.
5
Press and hold {MENU/SET} to
return to standby mode.
return to standby mode.
Note:
L
L
To return to the previous menu, press
{<}
{<}
.
L
If you are connected via a PBX, a
longer flash time may be necessary to
use PBX functions (transferring a call,
etc.). Consult your PBX installer for
the correct setting.
longer flash time may be necessary to
use PBX functions (transferring a call,
etc.). Consult your PBX installer for
the correct setting.
Temporary tone dialing (for
rotary/pulse service users)
rotary/pulse service users)
You can temporarily switch the dialing
mode to tone when you need to access
touch tone services (for example,
answering services, telephone banking
services, etc.).
mode to tone when you need to access
touch tone services (for example,
answering services, telephone banking
services, etc.).
Press {*} (TONE) before entering
access numbers which require tone
dialing.
access numbers which require tone
dialing.
➔Flash Time
Hold Reminder
Hold Reminder
Handsfree Mode
[V/^]:Scroll
Flash Time
=600 ms
[SET]:Save
[V/^]:Change
KXT4200_OI.book Page 30 Friday, September 1, 2006 8:53 AM