Panasonic KX-TG5436 사용자 설명서
Intercom Features
30
For assistance, please visit http://www.panasonic.com/consumersupport
Intercom
Intercom calls can be made between a
handset and the base unit, and between 2
handsets.
Call the desired unit by selecting the
extension number, shown in the upper
right of each handset’s display. The base
unit’s extension number is 0.
handset and the base unit, and between 2
handsets.
Call the desired unit by selecting the
extension number, shown in the upper
right of each handset’s display. The base
unit’s extension number is 0.
L
To confirm the handset’s extension
number ([1] or [2]), place the handset
on the base unit or charger.
number ([1] or [2]), place the handset
on the base unit or charger.
L
The base unit will display the paging or
paged handset number (H1 or H2).
paged handset number (H1 or H2).
Note:
L
If you have difficulty hearing the other
party while using the speaker, decrease
the speaker volume.
party while using the speaker, decrease
the speaker volume.
L
If you receive a phone call while talking
on the intercom, you will hear 2 tones
(page 36). To answer the call, press
{
on the intercom, you will hear 2 tones
(page 36). To answer the call, press
{
OFF}, then press {C} or {s}.
L
You cannot change the ringer tone for
intercom calls.
intercom calls.
From the handset to the base unit
1
Handset:
Press {INTERCOM}, then press {0}.
Press {INTERCOM}, then press {0}.
L
You can also select the base unit by
pressing {V} or {^} then pressing
{
pressing {V} or {^} then pressing
{
>}.
L
The base unit will ring for 1 minute.
L
To stop paging, press {OFF}.
2
Base unit:
Press either {LOCATOR/INTERCOM
1} or {LOCATOR/INTERCOM 2} to
Press either {LOCATOR/INTERCOM
1} or {LOCATOR/INTERCOM 2} to
answer the page.
3
Handset:
When finished talking, press {OFF} or
place the handset on the charger.
When finished talking, press {OFF} or
place the handset on the charger.
Note:
L
During an intercom call, the handset
user can switch to the speaker by
pressing {s}. To switch back to the
receiver, press {C}.
user can switch to the speaker by
pressing {s}. To switch back to the
receiver, press {C}.
L
To adjust the base unit’s speaker
volume, press {>} or {<} repeatedly. 8
levels (high to low) are available.
volume, press {>} or {<} repeatedly. 8
levels (high to low) are available.
From the base unit to a handset
1
Base unit:
Press {LOCATOR/INTERCOM
Press {LOCATOR/INTERCOM
1} or
{
LOCATOR/INTERCOM
2}.
L
The handset will beep for 1 minute.
L
To stop paging, press either
{
{
LOCATOR/INTERCOM
1} or
{
LOCATOR/INTERCOM
2}.
2
Handset:
Press {C}, {s}, or {INTERCOM} to
answer the page.
Press {C}, {s}, or {INTERCOM} to
answer the page.
3
Base unit:
When the paged party answers, speak
into the MIC.
When the paged party answers, speak
into the MIC.
4
Base unit:
When finished talking, press either
{
When finished talking, press either
{
LOCATOR/INTERCOM
1} or
{
LOCATOR/INTERCOM
2}.
Note:
L
You can locate a misplaced handset by
paging it. (Handset locator)
paging it. (Handset locator)
From one handset to the other handset
Example: When handset 1 calls handset 2.
Example: When handset 1 calls handset 2.
1
Handset 1:
Press {INTERCOM}, then press the
other handset number {2}.
Press {INTERCOM}, then press the
other handset number {2}.
L
You can also select the handset by
pressing {V} or {^} then pressing
{
pressing {V} or {^} then pressing
{
>}.
L
The paged handset will beep for 1
minute.
minute.
L
To stop paging, press {OFF}.
TG5436(e).book Page 30 Friday, March 25, 2005 5:40 PM