Panasonic KX-TG6021 사용자 가이드

For assistance, please visit http://www.panasonic.com/help

45

I fully charged the battery, 
but 7 continues to flash, 
or 8 is displayed.

L

Clean the charge contacts and charge again 
(page 11).

L

The battery may need to be replaced with a new 
one (page 10).

The handset display is 
blank.

L

Confirm that the battery is properly installed.

L

Fully charge the battery (page 10).

While charging, the charge 
indicator does not light and 
“Charge for 7h” is 
displayed.

L

The battery is empty. The charge indicator does 
not light in order to concentrate on charging. 
After about 5 minutes, the charge indicator lights 
and “Charging” is displayed.

Static is heard, sound cuts 
in and out. Interference 
from other electrical units.

L

Move the handset and base unit away from 
other electrical appliances.

L

Move closer to the base unit.

L

Turn on the clarity booster feature (page 17).

L

If your unit is connected to a telephone line with 
DSL service, we recommend connecting a noise 
filter between the base unit and the telephone 
line jack. Contact your DSL provider for details.

The handset does not ring.

L

The ringer volume is turned off. Adjust it (page 
27).

The base unit does not 
ring.

L

The ringer volume is turned off. Adjust it (page 
16).

I cannot make a call.

L

The dialing mode may be set incorrectly. 
Change the setting (page 14).

L

Another handset is in use. Try again later.

I cannot have a 
conversation using the 
headset.

L

Make sure that an optional headset is 
connected properly (page 41).

L

If “SP-phone” is displayed on the handset, 
press {C} to switch to the headset.

I cannot make long 
distance calls.

L

Make sure that you have long distance service.

I cannot page the handset.

L

The called handset is too far from the base unit.

L

The called handset is in use. Try again later.

I cannot page the base 
unit.

L

The base unit is in use. Try again later.

TG602X_605X.book  Page 45  Thursday, February 8, 2007  2:39 PM