Panasonic KX-TVS50 사용자 설명서
4.3
CONNECTING THE KX-TVS50/80 WITH THE PANASONIC KX-TD816, KX-TD1232 AND KX-TD308
80
INTEGRATING THE VPS WITH THE PANASONIC KX-TA ANALOG PBX AND KX-TD DIGITAL PBX
4.3.3
KX-TD308 Software Verification and Programming for
Digital Integration via the Manager's Extension
It is important that the KX-TD308 has the proper software level to allow Digital Integration
with the VPS. Follow the procedures below to confirm the software level, then complete the
required programming before starting up the VPS.
with the VPS. Follow the procedures below to confirm the software level, then complete the
required programming before starting up the VPS.
All of the following procedures must be done after entering system programming. Refer
to the KX-TD308 Installation Manual for instructions on how to enter the system
programming mode.
to the KX-TD308 Installation Manual for instructions on how to enter the system
programming mode.
Software Verification
1.
Verify Software - Check the software version of the KX-TD308 using System Program
[116].
[116].
Example: P871FYMMDDA
The underlined digits represent the software production date code (year, month, day). For
Digital Integration, the software version of the PBX must be P871F or higher.
Digital Integration, the software version of the PBX must be P871F or higher.
If the software version of the PBX is lower than this, call National Parts Center (1-800-
833-9626) to order a software upgrade.
833-9626) to order a software upgrade.
From the SYS-PGM NO ? screen:
a)
Enter [116].
b)
Press the NEXT button (SP-PHONE).
c)
The system displays the ROM version and the date it was created.
This version must be P871F or higher for Digital Integration to be utilized.
2.
Set the date and time using System Program [000].
Date and time are automatically synchronized between the VPS and the Panasonic KX-TD
series telephone systems during initial setup.
Date and time are automatically synchronized between the VPS and the Panasonic KX-TD
series telephone systems during initial setup.
3.
Assign the Voice Mail Port. This program tells the PBX which jack will be connected to
the VPS. This allows the PBX to send the proper Digital Integration information to those
the VPS. This allows the PBX to send the proper Digital Integration information to those
The required programming is now complete and the VPS and KX-TD1232 should be able
to communicate through Digital Integration.
to communicate through Digital Integration.
When running the Quick Setup command (Section 5 CUSTOMIZING THE SYSTEM)
from the VPS, the PBX transmits the station information automatically. This saves time
when programming the VPS.
from the VPS, the PBX transmits the station information automatically. This saves time
when programming the VPS.