Panasonic CPC-EX 사용자 설명서

Chapter 5. Peripheral Equipment

 Section 300-Installation

5-34

DBS Manual - Revised April 2000

DBS-2.3/9.2-300

• The Single Line Telephone Adaptor (SLTA, VB-43709) provides an 

alternative way of connecting analog DTMF telephones (2500 sets). One 
SLTA supports up to 4 Single Line Telephones.

• Each SLT extension requires a digital extension port connection to the 

SLTA.

1.  Remove the cover from the SLTA. 

2.  Remove the cable punch-out plate (Figure 5-20) to make an opening for 

the cables coming into the SLTA.

To remove the plate, cut the grooves on either side with diagonal cutters. 
Then bend the plate back and forth with needle-nose pliers to remove it.

3.  Mount the SLTA to the wall (see Figure 5-21).

Note: Table 5-11 shows the maximum distance the SLTA can be located 
from the DBS.