Panasonic CPC-EX 사용자 설명서
Section 300-Installation
Chapter 4. Trunks and Lines
DBS-2.3/9.2-300
DBS Manual - Revised April 2000
4-41
Digital Extensions
The following instructions explain how to connect digital extensions. These
instructions apply for key phones and Digital Single-Line Telephones
(DSLTs). Special instructions are provided for installing the DSS/72 and
EM24 terminals, which connect to digital phones.
instructions apply for key phones and Digital Single-Line Telephones
(DSLTs). Special instructions are provided for installing the DSS/72 and
EM24 terminals, which connect to digital phones.
1. Install the DEC cards in extension slots.
2. Use a standard 50-pin cable to connect the extensions from the MDF to
the appropriate extension connector, as shown in Figure 4-13 on page 4-
31. (Refer to Tables 4-20 through 4-22 for extension pinouts.)
31. (Refer to Tables 4-20 through 4-22 for extension pinouts.)
3. If you are installing a DBS 40, attach the EMI filter to the amphenol
cable, as shown in Figure 4-15.
DSS/72
Guidelines
• The DSS/72 (VB-43320) is a 72-key console that can be attached to the
attendant phone. It provides direct station selection and busy lamp fields
for internal lines. The DSS/72 can also be used for text assignment.
for internal lines. The DSS/72 can also be used for text assignment.
• When the attendant feature package (VB-43330) is installed (CPC-B
Version 2.0 to 4.0 only), the DSS/72 can be used as an Attendant Console.
The Attendant Console provides station monitoring and call transfer by
name for large systems, even if a large display phone is not used. For a
detailed description of the differences between the standard DSS/72 and a
DSS/72 configured as an Attendant Console, see Feature Operation,
Section 700. For instructions on using the Attendant Console, see the
Attendant Console User Guide, Section 760.
The Attendant Console provides station monitoring and call transfer by
name for large systems, even if a large display phone is not used. For a
detailed description of the differences between the standard DSS/72 and a
DSS/72 configured as an Attendant Console, see Feature Operation,
Section 700. For instructions on using the Attendant Console, see the
Attendant Console User Guide, Section 760.
• Up to two DSS/72s or one Attendant Console can be assigned to attendant
phones 1 and 2. Attendant phones 3 and 4 can each have one Attendant
Console assigned, but neither can have a DSS/72.
Console assigned, but neither can have a DSS/72.
• If more than one DSS/72 is assigned to an attendant phone, only one of the
DSS/72s can be cabled from the same wall jack as the attendant phone.
Additional DSS/72s must be cabled from separate wall jacks.
Additional DSS/72s must be cabled from separate wall jacks.
• The DSS/72 comes with a mounting bracket, screws, and a two-conductor
cable for attaching the DSS to the key phone.