Polycom 1500 C 사용자 설명서

다운로드
페이지 158
User Guide for the Polycom VVX 1500 C Business Media Phone for Cisco Unified Communications Manager (SIP)
118
Polycom, Inc.
 
3
Tap  
> Settings > Basic Preferences > Picture Frame
4
From the Picture Frame screen, specify the folder in which you stored 
your images on the USB flash drive, and the length of time you want each 
image to display:
— In the Folder field, enter the name of the folder in which you placed 
your images on the USB flash drive.
If you didn’t place the pictures in a folder (that is, you placed your 
pictures in the root directory), don’t enter a folder name.
— Tap the Time Per Image field, and then enter the number of seconds 
you want each picture to display.
You can enter a minimum of 3 seconds and a maximum of 300 
seconds. The default is 5 seconds.
5
Tap the Save soft key.
If the message “No pictures found” displays after you tap the Save 
soft key, there are no pictures in the folder you specified, or in the root 
directory (if you did not enter a folder name). Go back and make sure the 
information you entered is correct.
6
Tap 
 to return to the idle screen.
7
From the idle screen, tap 
 > Settings > Basic Preferences > 
Screen Saver.
8
From the Screen Saver screen, do the following:
— Tap the Screen Saver field’s highlighted box. From the drop-down 
list, tap Enabled to enable a screen saver.
— Tap the Wait Time field, and then enter the number of minutes the 
phone should wait after no activity before displaying the screen saver.
You can enter a minimum of 1 minute and a maximum of 9999 
minutes. The default is 15 minutes.
9
Tap the Save soft key.
10
Tap 
 to return to the idle screen.
After the number of minutes you specified in the Wait Time field, your phone 
will display the screen saver.
You can stop the screen saver at any time by tapping the touch screen (but the 
screen saver will re-start if your phone is idle again).