GE 21008 사용자 설명서

No dial tone

• Check or repeat installation steps:

Make sure the base power cord is connected to a working

electrical outlet.

Make sure the telephone line cord is connected to the base and the wall

jack.

• Connect another phone to the same jack. If it doesn’t work, the problem

might be your wiring or local service.

• The handset may be out of range of the base. Move closer to the base

• Make sure the battery is properly charged (for 16 hours).

• Make sure the battery pack (in the handset) is properly installed.

• The handset should beep when you press the talk/callback button, and

the charge indicator on the base should be lit when the handset rests in
the cradle. If not, the battery may need to be charged.

• Place handset in charge cradle for at least 20 seconds to reset the unit.

Dial tone is OK, but can ’t dial out

• Make sure the TONE/PULSE dialing mode is set to the type of phone

service you are subscribed to.

Handset does not ring

• Make sure the handset ringer software switch is set to on.

• The handset may be out of range of the base. Move closer to the base.

• You may have too many extension phones on your line. Try unplugging

some extension phones.

• Check for a dial tone.