GE 28861xx2 사용자 설명서

다운로드
페이지 44
4
Speakerphone Operation
For best speakerphone performance, avoid the following: 
•  Areas with high background noise. (The microphone might pick up these 
sounds.)
•  Surfaces affected by vibration. 
•  Recessed areas such as in a corner, under a cupboard, or next to a cabinet, 
which can generate an echo effect.
Note the following guidelines when using the speakerphone. 
•  Stay reasonably close to the phone so that you can be clearly heard by the 
person to whom you are speaking.
•  The SPEAKER indicator is illuminated when the speakerphone is in use. 
Switch between Speakerphone & Receiver on the Base
To switch to speakerphone mode, the 
speaker button and hang up the corded 
handset.
To switch to receiver mode, pick up the corded handset from the base.
Switch between Speakerphone & Receiver on the Cordless Handset
To switch to speakerphone mode, press the 
speaker
button.
To switch to handset, press the 
speaker
button again or press the    button.
Special Features
Page All Cordless Handsets from Base
1.  Press and hold the 
page/intercom button on the base for 3 seconds, the base  
screen displays 
PAGING HANDSETS
.  Cordless handsets will beep and the screen displays 
PAGING for 30 seconds.
3.  Press the 
exit or cancel button on the base or press any button on the cordless 
handset to stop. 
Temporary Tone (for pulse or rotary service use)
In pulse dialing mode, you can switch to Tone dialing to access bank facilities etc. by 
pressing the 
*
/tone button. It will reset automatically to pulse dialing after you end 
the call.