GE 28861xx2 사용자 설명서

36

Telephone Solutions 

No dial tone

•  Check and repeat installation steps:
  Ensure the base power cord is connected to a working outlet .
  Ensure the telephone line cord is connected to the base and the wall jack.
•  Connect another phone to the same jack; if there is still no dial tone, the problem 

might be your wiring or local service.

•  The cordless handset may be out of range of the base. Move closer to the base.
•  Ensure the battery is properly charged (16 hours).
•  Ensure the battery pack installed correctly. 
•  Did the handset beep when you pressed the TALK/call back button? The battery 

may need to be charged.

•  Place handset in charge cradle for at least 0 seconds.

Dial tone is OK, but can’t dial out 

•  Make sure the TONE/PULSE setting on the base is set to the type of phone 

service you are subscribed to.

Handset/Base does not ring  

•  Make sure the handset ringer switch is turned on and the base ringer is 

programmed to HI.

•  The cordless handset may be out of range. Move closer to the base.
•  You may have too many extension phones on your line. Try unplugging some 

phones.

•  Check for dial tone. If no dial tone is heard, see No dial tone above.

You experience static, noise, or fading in and out

•  Change channels.
•  The cordless handset may be out of range of the base. Move closer to the base.
•  Make sure base is not plugged into an outlet with another household appliance.
•  Charge the battery.