AEG 20 사용자 설명서
8
AEG Milano 20_en
Setting the Flash time
The flash-time can be set to short (100 ms) or long (300 ms). The flash-time to
be used depends on the installation, on which your unit is connected
• connected to the public telephone network with comfort functions;
• connected to a PABX with similar functions.
be used depends on the installation, on which your unit is connected
• connected to the public telephone network with comfort functions;
• connected to a PABX with similar functions.
The comfort functions:
waiting call
toggling
consultation
second call
conference call with three
must be ordered and paid for with your local telephone network operator. Your
provider will also be able to tell you, which flash-time has to be used on his in-
stallation (the flash-time to be set is usually long or 300 ms).
provider will also be able to tell you, which flash-time has to be used on his in-
stallation (the flash-time to be set is usually long or 300 ms).
When the appliance is connected to a personal PABX, its supplier or the deliv-
ered manual can inform you about the flash-time to be set (the flash-time to be
set is usually short or 100 ms). The following description does not necessarily
correspond to the description in the manual of your PABX.
ered manual can inform you about the flash-time to be set (the flash-time to be
set is usually short or 100 ms). The following description does not necessarily
correspond to the description in the manual of your PABX.
The flash-time can be set to 100 or 300 ms with the slide switch (E) on the side
of the appliance.
of the appliance.