Avaya MDW 9040 사용자 설명서
4
Registering the Pocket Phone to a Dual Radio Module
Setting Up and Registering the
MDW 9040 Wireless Pocket Phone Installation and Use,
503-801-190
36
Issue 2, February 2001
3
Press the Select-Row (
) button to move the arrow to the right of the selected
option to Configuration.
4
Press the Softkey (
) below Sel.
The initial Configuration Menu screen displays.
5
Press
to
move the arrow to Registration and then press the Softkey (
)
below Sel.
The Registration screen (Zone 1 and Zone 2) displays.
6
For single zone operation or the first zone of a dual zone installation, move the
arrow to Zone 1, then press the Softkey (
arrow to Zone 1, then press the Softkey (
) below Reg.
The following occurs:
•
The selected radio module makes checks regarding the handset registration
request.
request.
•
If there are no unexpected conditions, the associated base module and
handset communicate using special link-up signaling.
handset communicate using special link-up signaling.
•
The handset displays the following screen when registration is completed.
(When selecting Registration in Step 5, this screen displays if the handset
was previously registered.)
(When selecting Registration in Step 5, this screen displays if the handset
was previously registered.)
Note:
Repeat these procedures for a second handset registered to this radio
module or for multiple radio modules in a single zone configuration.
module or for multiple radio modules in a single zone configuration.
Options
Configuration
Configuration
Ä
Test Mode
Sel
Sel
Exit
CONFIGURE MENU
Registration
Registration
Ä
Button Map
Sel More
Sel More
Back
REGISTRATION:
Zone 1
Zone 1
Ä
Zone 2
Reg Back
Reg Back
IMPORTANT NOTE: After you enter the Registration Mode on the handset,
there is a 60 second time limit in which to register before the menu time’s out.
there is a 60 second time limit in which to register before the menu time’s out.
REGISTRATION:
Z1 Registered
Z1 Registered
Ä
Zone 2
Reg Un-Reg
Reg Un-Reg
Back