Avaya MDW 9040 사용자 설명서

MDW 9040 Wireless Pocket Phone Installation and Use, 

503-801-190

Issue 2, February 2001

The MDW 9040 Pocket Phone has an energy-saving “sleep” or “standby” mode.

You can wake up the phone in any of the following ways: 

Press 

 on the handset.

Press the Select-Row button 

.

You can also press 

 to activate the display to see whether you have a 

message or to check if your alerter is enabled without actually turning the 
phone on (if the communications system is very busy, for instance).

Press either of the volume control buttons (“

” or “

”).

Press .

When you “wake up” the phone, the handset display is activated and shows line and handset status.

To place a call using your MDW 9040, use the following procedure:

Press 

 on the handset (or the headset On/Off button if you have the headset 

attached) to turn the phone on.

The MDW 9040 Pocket Phone seizes an available line and a triangle or a 
rectangle (depending on your communications system) appears beside that line in 
the handset display.

You hear a dial tone.

Dial the call as you would on a wired system phone.

To end the call, press 

.

Unless there is other activity on the phone, the handset goes into the 
energy-saving “sleep” mode.

When you receive a call on your MDW 9040 Pocket Phone, you hear a ringing tone if 
your alerter is enabled, or you feel a vibration in the handset if the vibrator is enabled, 
or both. To answer the call, use the following procedure:

Press 

 on the handset (or the headset On/Off button if you have the headset 

attached) to turn the phone on.

You are automatically connected to the ringing line.

Speak into the handset to converse with your caller.

To end the call, press 

.