Avaya 3600 Series 사용자 설명서

The softkeys on your WT enable you to quickly activate system 
features. There are four softkeys and up to 16 features 
programmed for softkey access. The display area directly above 
each softkey is programmed with a feature abbreviation to guide 
your access to the feature. The softkeys are referred to from left 
to right as A,B,C,D. In our diagram, the corresponding display 
area is labeled Aaaa, Bbbb, Cccc, Dddd. 

The softkeys operate with a toggle function. Press the left or right 
side of the key to activate the corresponding softkey feature. 

The first four primary softkey features are displayed in the 
softkey function display area by default. To view all of the 
features that can be activated through the softkeys, go off hook 
(briefly press the 

 key) and then press the 

 key. The 

second set of feature abbreviations will display in the softkey 
display area. Each time the 

 key is pressed, a different set of 

features is displayed, until all 16 possible features have been 
displayed. The softkey features display in the same sequence as 
they appear on the Shortcut menu.  

Activate any feature while its abbreviation is displayed by 
pressing the corresponding softkey. 

Using the Shortcut keys  While scrolling through the softkey functions, a shortcut key may 

be pressed to activate its corresponding feature, whether or not 
that feature is currently displayed in the softkey function display 
area. 

Because system features vary, your system administrator will 
explain them in reference to your telephone system. 

Example:  Using the previous example for the Transfer function: If the 

Transfer function is assigned to softkey A in the second level 
row, then 

 will display in the 

 softkey display area when 

the 

 key is pressed. Therefore, while in a call press 

 + 

(softkey 

) to transfer the call. 

Alternately, you may use the shortcut key by pressing 

 + 

. 

You may also press 

 + 

as described in the Shortcut menu 

section above. 

Note:  PBX systems function differently. If your WT does not conform 

to these instructions, contact your system administrator for 
function clarification. 

21-300632, Issue 1, July 2005 

Page 13